Watchman Outdoor Cook Stove Bundle

The Watchman Stove is made by hand with pride in the USA.

The First Firing

The high heat paint requires a heat cycle or two to fully cure. We recommend burning the stove for at least 30 minutes to burn off any trapped solvents. We also recommend getting the stainless steel cooktop hot and scrubbing it with a standard stainless steel grill cleaning brush. This will clean any residue that may be present from manufacturing processes. Now you are ready to cook!

There are many ways to run and cook on your new Watchman Stove. Your imagination is the only limitation. You may even discover a new way to run the stove.

You can choose the Front Feeding option, which is the quickest way to get the stove up to cooking temperature. The Top Feeding option; perfect for cooking with Charcoal or to kick back and enjoy a small fire for s'mores with your family and friends. Featuring an Ash slide which makes dumping hot ashes a breeze. Which also doubles as a secondary air intake while using the top feeding option.

You can enjoy the options of Direct and indirect cooking practices with ease. Use some seasoned wood or wood chips and enjoy the flavor with either option.

The Potato Plate makes keeping food warm simple and efficient. The plate is warmest around the 3 sides of the vertical 6" Tube; it averages 300 degrees F. The 4 outside corners are usually 50-75 degrees cooler. The purpose of the shelf is to cook corn, potatoes, shrimp in a pan with butter, for warming side dishes, sauce, or even warming up a quick cup of coffee. Who wouldn't enjoy a fire warmed cup of joe? The versatility of this stove and it's rugged build will give you years of enjoyable outdoor cooking

Safety

Place the stove in a location where there is no danger of setting anything outside of the stove on fire. Adjust the legs with a 9/16” wrench so that the stove sits as level as possible with no rocking action. Make sure the ash door (located at the base of the 6" tube) is fully closed. This can be opened later to increase draft as needed. The high heat paint requires a heat cycle or two to fully cure. it is recommended to burn the stove for at least 30 minutes to burn off any trapped solvents. It is also recommended to scrub the stainless cooktop with a stainless brush while hot. Most surfaces on the stove will become hot when burning. Please keep children and pets a safe distance away.

• Made in the USA
• For Outdoor use ONLY
• 3/16" Laser cut hinged stainless cooking surface
• 11 gauge carbon steel funnel
• 1/4" carbon steel "potato" plate with hand carrying slots (slots are optional)
• 6" x 3/16" wall steel tube stove body
• 3/16" stainless steel laser cut Ash grate
• Weight: 75lbs
• Measures: 20" W x 30" H x 22" D
• Optional Accessories: Charcoal Grate, Cart, Griddle, and Convoy Hitch Hauler
• Direct or Indirect Cooking
• Ash slide for easy ash dumping
• Most surfaces on the stove will become HOT when burning. Please keep children and pets at a safe distance as not to cause burns

The Options

üü Rolling Cart

• 16 gauge steel
• 4 swivel casters
• Powder Coated Finish

Charcoal Grate

• 3/16" Thick laser cut 305 stainless steel
• sits at the bottom for charcoal cooking
• perfect accessory for your Watchman Outdoor Cook Stove
• One of a kind design and efficiency for Charcoal cooking enthusiasts

Convoy Hitch Hauler

• Includes 1 hitch pin
• Intended only for hauling purposes, not recommended to use your stove while connected to your vehicle
• Size:8" Rise from Hitch
• Powder coated Finish See Disclaimer Below

Griddle

• for use with the Watchman Outdoor Cook Stove
• 3/16" Steel plate with Grease slot
• Sits directly on top of funnel with the cook top flipped back

POWDER COST FINISH DISCLAIMER: Due to extreme temperatures that can be reached, the powder cost finish is subject to peeling, bubbling, or flaking over time. Especially near the fire chamber, it may become brittle and chip.

Create your own Watchman Stove Bundle

• Optional Add On's Griddle, Convoy Hitch Hauler, Charcoal Grate, and Rolling Cart

POWDER COST FINISH DISCLAIMER: Due to extreme temperatures that can be reached, the powder cost finish is subject to peeling, bubbling, or flaking over time. Especially near the fire chamber, it may become brittle and chip.