Shasta Vent 6'' Elbow Strap

The Elbow Support Bracket is designed to transfer the weight of a chimney offset to nearby structural members. One or more Elbow Supports are required whenever an offset is made in the chimney system. The Elbow Support Bracket is also used as a lateral support when the chimney extends more than 5-ft above the roof if the chimney is not otherwise secured.

Additional Information:

Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between stainless steel walls to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall.

  ShastaVent Catalog

Specifications:
Diameter: 6'' Construction Material: .020'' type 304 Stainless Steel inner and outer wallsClearance: 2" clearance to combustiblesListings: ETL Listed by Intertek to the HT requirements of UL 103Twist-lock joints for ease of assembly and Locking Bands for securityHigh-Temperature, thin-fiber ceramic insulation blanket maintains superior draft performanceUp to four 30 Degree elbows, each capable of rotating 360 Degrees can be used in the systemTested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

• Diameter: 6''
• Construction Material: .020'' type 304 Stainless Steel inner and outer walls
• Clearance: 2" clearance to combustibles
• Listings: ETL Listed by Intertek to the HT requirements of UL 103
• Twist-lock joints for ease of assembly and Locking Bands for securityHigh-Temperature, thin-fiber ceramic insulation blanket maintains superior draft performance
• Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

LIMITED LIFETIME WARRANTY Shasta Vent Inc (Shasta Vent) provides this limited lifetime warranty for all of its products. Subject to the limitations set forth below, Shasta Vent warrants that its products will be free from defects in material or manufacturing, if properly installed, maintained and used. Shasta Vent products are fully warranted if installed only by a professional installer (see below for definition). This Warranty is not transferable from the original homeowner. This warranty does not cover normal wear and tear, smoke damage or damage caused by chimney fires, acts of God, or any product that was: (1) modified or altered; (2) improperly serviced, inspected or cleaned; or (3) subject to negligence or any use not in accordance with the installation instructions included with the product as determined by Shasta Vent.

  Manufacturer's Limited Lifetime Warranty