Shasta Vent 8 Inch Firestop Radiation Shield

The Firestop Radiation Shield is a fire safety component and is required by the safety standard and building codes in order to achieve a safe chimney installation. A Firestop Radiation Shield must be installed wherever the chimney system penetrates through a floor level of the structure, except at the roof level or where the Ceiling Support Box is located.

Additional Information:

Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

  ShastaVent Catalog

  Installation Instructions

Specifications:

• Dimensions: 12 7/8'' Diameter x 11-20'' Adjustable Height
• Bottom Plate Dimensions: 16 1/4 Wide x 16 1/4 Long
• Lip from Flange to Edge measures 2 1/4''
• Clearance: 2" clearance to combustibles
• Construction Material: Galvanized Steel
• Listings: ETL Listed by Intertek to the HT requirements of UL 103

• Dimensions: 12 7/8'' Diameter x 11-20'' Adjustable Height
• Bottom Plate Dimensions: 16 1/4 Wide x 16 1/4 Long
• Lip from Flange to Edge measures 2 1/4''
• Clearance: 2" clearance to combustibles
• Construction Material: Galvanized Steel
• Listings: ETL Listed by Intertek to the HT requirements of UL 103

LIMITED LIFETIME WARRANTY Shasta Vent Inc (Shasta Vent) provides this limited lifetime warranty for all of its products. Subject to the limitations set forth below, Shasta Vent warrants that its products will be free from defects in material or manufacturing, if properly installed, maintained and used. Shasta Vent products are fully warranted if installed only by a professional installer (see below for definition). This Warranty is not transferable from the original homeowner. This warranty does not cover normal wear and tear, smoke damage or damage caused by chimney fires, acts of God, or any product that was: (1) modified or altered; (2) improperly serviced, inspected or cleaned; or (3) subject to negligence or any use not in accordance with the installation instructions included with the product as determined by Shasta Vent.

  Manufacturer's Limited Lifetime Warranty