Shasta Vent 6 Inch Ventilated Roof Flashing - 6 Pitch

The Flashing provides a weather resistant means of sealing the chimney system where it passes through the roof. Flashings are available as either Non-Ventilated or Ventilated. A Ventilated Flashing is required when the chimney is installed in an unventilated chase enclosure or is fully enclosed through the attic.

Additional Information:

Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

  ShastaVent Catalog

  Installation Instructions

Specifications:

• Ventilated Flashing
• Fits 2/12-6/12 Roof Pitches
• Cone Dimensions: 9'' ID x 7 1/2'' High
• 24'' W x 23" L x 28'' High
• Construction Material: Galvanized Steel
• Listings: ETL Listed by Intertek to the HT requirements of UL 103

• Ventilated Flashing
• Fits 2/12-6/12 Roof Pitches
• Cone Dimensions: 9'' ID x 7 1/2'' High
• Base Dimensions: 24'' W x 23" L x 28'' High
• Construction Material: Galvanized Steel
• Listings: ETL Listed by Intertek to the HT requirements of UL 103

LIMITED LIFETIME WARRANTY Shasta Vent Inc (Shasta Vent) provides this limited lifetime warranty for all of its products. Subject to the limitations set forth below, Shasta Vent warrants that its products will be free from defects in material or manufacturing, if properly installed, maintained and used. Shasta Vent products are fully warranted if installed only by a professional installer (see below for definition). This Warranty is not transferable from the original homeowner. This warranty does not cover normal wear and tear, smoke damage or damage caused by chimney fires, acts of God, or any product that was: (1) modified or altered; (2) improperly serviced, inspected or cleaned; or (3) subject to negligence or any use not in accordance with the installation instructions included with the product as determined by Shasta Vent.

  Manufacturer's Limited Lifetime Warranty