8" Shasta Vent 15 Degree Elbow Kit

Elbow kit Includes: 2 - 15 degree elbows and 1 - elbow support bracket. Elbows are used for offsets in the chimney system to avoid structural members or other obstacles. Shasta Vent All-Fuel HT Chimney system can accommodate two offsets and returns, for a maximum total of four elbows in the system. Elbows cannot be combined to create an angle greater than 30 Degrees. Offsets must be supported by either an Elbow Support or Tee Support Bracket.

Additional Information:

Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist end rings and quick and easy Locking Bands. Elbows do not contain the twist lock teeth like other systems, so they can be easily rotated to the desired angle of your installation, secured by the locking bands once in position. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

  ShastaVent Catalog

  Installation Instructions

Specifications:

• Elbow kit Includes: 2 - 15 degree elbows and 1 - elbow support bracket.
• Dimensions: 8'' ID x 10'' OD
• Capable of rotating 360 Degrees
• Clearance: 2" clearance to combustibles
• Listings: ETL Listed by Intertek to the HT requirements of UL 103
• Twist-lock joints for ease of assembly and Locking Bands for security
• Construction Material: .020'' type 304 Stainless Steel inner and outer walls
• High-Temperature, thin-fiber ceramic insulation blanket maintains superior draft performance

Elbow kit Includes: 2 - 15 degree elbows and 1 - elbow support bracket. Elbows are used for offsets in the chimney system to avoid structural members or other obstacles.LIMITED LIFETIME WARRANTY Shasta Vent Inc (Shasta Vent) provides this limited lifetime warranty for all of its products. Subject to the limitations set forth below, Shasta Vent warrants that its products will be free from defects in material or manufacturing, if properly installed, maintained and used. Shasta Vent products are fully warranted if installed only by a professional installer (see below for definition). This Warranty is not transferable from the original homeowner. This warranty does not cover normal wear and tear, smoke damage or damage caused by chimney fires, acts of God, or any product that was: (1) modified or altered; (2) improperly serviced, inspected or cleaned; or (3) subject to negligence or any use not in accordance with the installation instructions included with the product as determined by Shasta Vent.

  Manufacturer's Limited Lifetime Warranty