Natural Gas Cool Mount Safety Pilot Control For 18"-30" Logs

A safety pilot control valve adds safety and convenience to any vented gas log set. A three-position gas control knob is used to light the pilot, ignite the burner, and adjust the flame height. If the pilot goes out the safety control will shut off stopping the flow of gas completely. When in the burning season you will only need to light the pilot once with a match or lighter. After that you simply turn the control knob clockwise to ignite the burner. Once out of the burning season you simply shut off the pilot. The safety pilot control valve allows you ease of use and piece of mind. Many local codes require the use of a safety pilot control valve. This unit is for use with Natural Gas Only but may be converted for use with LP gas (propane) with the LP Conversion Kit for 18" to 24" Logs or LP Conversion Kit for 30" to 36" Logs.

WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.For more information go to http://www.P65Warnings.ca.gov.
Specifications:

• Includes: safety gas valve, heat shield, thermocouple and pilot burner assembly, stainless steel extension connector, brass union, and 3/8" FIP x 3/8" FL, 3/8" x 1 1/2" black nipple
• Ease of use and piece of mind

Add safety and piece of mind with the Cool Mount Safety Pilot Control for Natural Gas Logs. If your pilot goes out, this valve will shut off, which will stop the flow of gas to your burner. Once you light the pilot once, you won't have to worry about lighting it again unless it goes out.

• Includes: safety gas valve, heat shield, thermocouple and pilot burner assembly, stainless steel extension connector, brass union, and 3/8" FIP x 3/8" FL, 3/8" x 1 1/2" black nipple
• Ease of use and piece of mind