Dry Mix 211 Refractory Mortar - 10 lb.

Dry Mix 211 is a refractory mortar used for joining or repairing masonry flue tile or as a parge coating for building fireboxes. Non water soluble, this product is a hydraulic set mortar that does not require heat to cure, and it resists washing out when exposed to rain or water. Dry Mix 211 Develops a compressive strength above 2500 psi and withstands 2550 Degrees Fahrenheit without softening. Acid resistance meets or exceeds all the requirements of the National Fire Protection Association standard NFPA 211 and NYSCMA Tek Spec. Light Brown color.

Additional Information:

 MSDS Sheet

 Technical Data Sheet

WARNING: This product can expose you to chemicals including Crystalline Silica, which is known to the State of California to cause cancer. For more information go to http://www.P65Warnings.ca.gov.
Specifications:

• 10 lb Dry mix
• Acid resistant
• Non-water soluble refractory mortar
• For use in building masonry flue liners
• Use as a parge coating in fireboxes
• Withstands 2550 Degrees F
• Hydraulic set does not require heat to cure
• Meets or exceeds NFPA 211, 1988 edition
• Meets or exceeds NYSCMA Tek Spec No. 3

Dry Mix 211 is a refractory mortar used for joining or repairing masonry flue tile or as a parge coating for building fireboxes. Non water soluble, this product is a hydraulic set mortar that does not require heat to cure, and it resists washing out when exposed to rain or water. Dry Mix 211 Develops a compressive strength above 2500 psi and withstands 2550 Degrees Fahrenheit without softening. Acid resistance meets or exceeds...