ChimneyRx Masonry Fireplace Crack & Joint Sealant - 1 Pint

ChimneyRx Crack and Joint Sealant is used to seal larger cracks and other defects that cannot be corrected with water repellents alone. ChimneyRx Crack and Joint Sealant is a brusable, elastomeric sealant that is used to repair exterior cracks in mortar joints on chimneys, brick walls, and between concrete masonry units.

ChimneyRx Masonry Crack and Joint Sealant seals cracks up to 1/8" wide on brick faces and at mortar and brick joint interfaces to provide waterproof protection and minimize brick-mortar repair. Depending on the size of the crack, the Crack and Joint Sealant will dry clear to a milky white. Once it sets, it will prevent water filtration and subsequent damage while allowing water vapors to escape.

Using ChimneyRx Crack & Joint Sealant will solve tough leak problems without the expense of tuck pointing or surface grouting. It will not significantly change the appearance of most walls, chimneys, or masonry surfaces. A slight gloss will occur on dense surfaces which will lessen over time.

• Prevents Leaks through Mortar Joints
• Seals Cracks up to 1/8 inch
• Easy Brush Application

Additional Information:

View Product Data Sheet

View Material Safety Data Sheet

• 1 Pint
• Takes 2 hours to dry
• Dries clear to a milky white
• Seals cracks up to 1/8" wide
• Covers 137 bricks or 25 sq. ft.
• Easily cleans up with soap and water
• Application temperatures between 40° F and 100° F

ChimneyRx

Your prescription for chimney restoration with do it yourself convenience!

• Protect & preserve
• Remove unsightly stains
• Repair leaking chimneys
• Restore damage & deterioration