ASI 600 High Performance Red Silicone - 2.8 oz. Tube

ASI 600 Hi-Temperature Red Gasket Maker is a one-part, moisture curing, RTV (room temperature vulcanizing) silicone that cures to form a tough rubber gasket.

ASI 600 was specifically formulated to be used as a formed-in-place gasket where operating temperatures up to 310 Degrees C (600 Degrees F) are reached intermittently. ASI 600 high temperature silicone will remain permanently flexible and provides excellent resistance to aging, vibration and shock.

ASI 600 high temperature silicone is ready to use and requires no mixing or additives. The cure mechanism begins as soon as the sealant comes in contact with the air. At conditions of 25 Degrees C (77 Degrees F) and 50% relative humidity, the sealant will skin in 10 minutes and cure within 24 hours (1/4 bead), ultimate cure in 7 days. ASI 600 high temperature silicone is formulated for primary use as a formed-in-place gasket material because substrate release, rather than adhesion, is required.

• ASI 600 high temperature silicone meets the requirements of MIL-46106 Type 1 and meetsFDA, USDA requirements.