7" x 12" SuperPro Adjustable Stainless Steel Chimney Pipe - SPR7AL12

Selkirk SuperPro Chimney Pipe features a slim, advanced design that allows for installation between 16" centers and still provides a 2" clearance from combustible materials. It is durably constructed of 304-alloy stainless steel and a mineral wool insulation blanket that is formulated for optimum performance.

SuperPro Chimney Pipe is secured with a twist-lock design that couples chimney sections together with a 1/8 turn and a sectional over lap of 1-1/8". The chimney must extend at least three feet above the highest point where it passes through the roof surface and at least two feet higher than any part of the building within a horizontal distance of ten feet. Measures 7" Inside Diameter x 12" Long Adjusting from 2" to 9 1/2"

See all 7" Selkirk SuperPro Components.

Product Note: Locking bands are not included but are recommended for all joints, or pipe connections. For elbows and tees, locking bands are required. The appropriate locking band for 7" SuperPro Pipe is NLE5SE_SPR5SLB.

Additional Information:

Selkirk SuperPro offers the latest technology in factory-built chimney. It is designed to accompany todays appliances which are engineered to produce low emissions and high heat. SuperPro is manufactured with a 1" solid pack mineral wool fiber insulation to operate with superior performance, durability and safety. SuperPro is constructed of premium grade stainless steel to produce an extremely corrosion resistant outer shell.

Embossed couplers allow SuperPro to block moisture from penetrating the chimneys outer wall. Selkirk SuperPro is fabricated with twist lock connections and brass trim to embellish the chimney support components that may be installed inside of the home. SuperPro carries a manufacturers limited lifetime warranty that applies to all chimney components and is certified to UL 103 for all fuel use.

• Used to adjust the system to an exact overall length
• Used between elbows for a required offset distance
• All stainless construction with telescoping design
• 12" Length adjusts from 2" to 9 1/2"
• Available in 5", 6", 7" & 8" Diameters
• You must use SuperPro only with the same size SuperPro chimney sections, you cannot mix SuperPro with any other brands of pipe