7" SuperPro Stainless Steel 30 Deg. Elbow Kit - SPR7EL30K

SuperPro Elbow Kits are used when an offset in a chimney installation is required. During an offset installation, locking bands and support must be used on all elbows. SuperPro Elbows are durably constructed of 304-alloy stainless steel and a mineral wool insulation blanket that is formulated for optimum performance.

Elbows can be used at the same 2" clearance as chimney lengths and do not have locking ridges. This allows them to be rotated to attain optimum positioning, and allow the chimney to return to correct vertical alignment prior to installing locking bands. SuperPro Elbow Kits include 2 elbows, 4 locking bands, and 1 elbow support. Elbows measure 7" Diameter with a 30° offset.

See all 7" Selkirk SuperPro Components.

Product Note: Locking bands are not included but are recommended for all joints, or pipe connections. For elbows and tees, locking bands are required. The appropriate locking band for 7’’ SuperPro Pipe is 5SE-SPR7SLB.

Additional Information:

Selkirk SuperPro offers the latest technology in factory-built chimney. It is designed to accompany today's appliances which are engineered to produce low emissions and high heat. SuperPro is manufactured with a 1" solid pack mineral wool fibre insulation to operate with superior performance, durability and safety. SuperPro is constructed of premium grade stainless steel to produce an extremely corrosion resistant outer shell.

Embossed couplers allow SuperPro to block moisture from penetrating the chimneys outer wall. Selkirk SuperPro is fabricated with twist lock connections and brass trim to embellish the chimney support components that may be installed inside of the home. SuperPro carries a manufacturer's limited lifetime warranty that applies to all chimney components and is certified to UL 103 for all fuel use.

Specifications:

• Diameter: 7"
• Construction Materials: Stainless steel
• Clearances: 2"
• Listings: UL 103HT

SuperPro Elbow Kits are used when an offset in a chimney installation is required. During an offset installation, locking bands and support must be used on all elbows. SuperPro Elbows are durably constructed of 304-alloy stainless steel and a mineral wool insulation blanket that is formulated for optimum performance. Elbows can be used at the same 2" clearance as chimney lengths and do not have locking ridges. This allows...

  Manufacturers Limited Lifetime Warranty