6" Duct Booster Fan

Our Duct Booster fans are designed to boost air flow in long sections of warm air furnace duct when insufficient heat is attained at a distant register. Duct fans are also effective in aiding the transfer of heat through walls to adjoining rooms when installed in short sections of duct in the wall. Through-the-wall installations can be finished off using our cast iron or steel grilles. This fan produces 100 CFM and uses 62.1 watts. 115V AC. Available in 6" and 8" diameter models.

• UL approved motor.
• Designed for use where temperatures will not exceed 190 degrees F.
• Compressible foam outer ring for easy mounting in proper size duct.
• Stabilizing tab for mounting in rectangular duct.
• Complete with wire nuts, grommet, screws and instructions.

• 3000RPM
• .54AMPS
• 100 CFM
• Increases Airflow
• Warm up cold rooms or cool off hot rooms
• Save Energy
• Quiet and dependable
• Simple installation
• Installs in round or square ducts

Our Duct Booster fans are designed to boost air flow in long sections of warm air furnace duct when insufficient heat is attained at a distant register. Duct fans are also effective in aiding the transfer of heat through walls to adjoining rooms when installed in short sections of duct in the wall. Through-the-wall installations can be finished off using our cast iron or steel grilles. This fan produces 90 CFM and only uses 12 watts. 120V AC. Available in 6" and 8" diameter models.