4" Selkirk VP Pellet Vent Pipe Wall Bracket/Support - 4VP-WB

Selkirk Pellet Pipe Wall Bracket/Support is used to support vent pipe or tee sections.

VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).

See all 4" VP Pellet Pipe Components

Additional Information:

Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570° F.

  Installation Instructions

Specifications:

• Dimensions: 5'' Wide x 4 1/2'' dia. opening
• Construction Materials: 304 Stainless Steel Inner Wall, Paintable Galvanized Outer Wall
• Clearance: 3" to Combustible Material
• Listings: UL 103, ULC S609, ULC/ORD C441 and UL 641

Selkirk Pellet Pipe Wall Bracket/Support is used to support vent pipe or tee sections. VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C). See all 4" VP Pellet Pipe Components

  Manufacturers Limited Lifetime Warranty