4" Selkirk VP Pellet Insert 25' Flex Kit - 3/4VP-25IK
Selkirk VPThe Selkirk 4" Pellet Vent Flex Kit is designed for pellet fireplace insert installations only.
Kit Includes:- 4" Flex Flashing
- Silicone Sealant
- 4" Flex Termination Cap
- 3" Pellet Pipe Connector
- 4" Flex Flashing Adaptor
- 3" to 4" Pellet Increaser
- 25' of 4" diameter stainless flex pipe
VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).
See all 4" VP Pellet Pipe Components
Additional Information:
Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570°F.
Specifications:
- Diameter: 4"
- Clearances: 3" clearance to combustibles
- Listings: UL 641 (Standard for Low Temperature Venting). UL 103 (Standard for Residential Type and Building Heating Appliance Chimneys)
- Includes: 25' of 4" diameter stainless flex pipe, 4" Flex Termination Cap, 4" Flex Flashing Adaptor, 4" Flex Falshing, 3" to 4" Pellet Increaser, 3" Pellet Tee, 3" Pellet Pipe Connector, Silicone Sealant
- _PDF:
- selkirkvppelletpipewarranty|pdf|Manufacturer's Limited Lifetime Warranty
- Clearance:
- Non-Clearance
- Country Of Origin:
- United States
- Pipe Wall:
- Single Wall
- Pipe Piece:
- Termination Cap
- Type:
- Pellet Vent Pipe
- Diameter:
- 4 Inch
- Product Type:
- Chimney Pipe
- HR-mail-only:
- true
- __badge:
- Free Shipping
- _showBulkPricing:
- is-open
- _Base Price:
- 1321.99