3" Selkirk VP Pellet Vent Pipe Ceiling Support/Firestop - 3VP-CS

Selkirk VP Pellet Pipe Ceiling Support/Firestop is required where the vent passes through the ceiling and centers the pipe to provide proper 3" clearance. Can be used in vertical and horizontal installations and features proven gasketed coupling joints that connect in seconds to assure joint integrity. Available in 3" and 4" diameters constructed of paintable galvanized steel.

VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).

Additional Information:

Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570° F.

  Installation Instructions

Specifications:

• Dimensions: 12 1/2'' x 12 1/2'' base with a 3 5/8'' dia. opening
• Construction Materials: 304 Stainless Steel Inner Wall, Paintable Galvanized Outer Wall
• Clearance: 3" to Combustible Material
• Listings: UL 103, ULC S609, ULC/ORD C441 and UL 641

Selkirk VP Pellet Pipe Ceiling Support/Firestop is required where the vent passes through the ceiling and centers the pipe to provide proper 3" clearance. Can be used in vertical and horizontal installations and features proven gasketed coupling joints that connect in seconds to assure joint integrity. Available in 3" and 4" diameters constructed of paintable galvanized steel. VP Pellet Pipe is used for venting pellet...

  Manufacturers Limited Lifetime Warranty