14" DuraTech Anchor Plate - 14DT-AP

The DuraTech Anchor Plate is used to attach DuraTech Chimney to zero-clearance or masonry fireplaces. Check with the zero-clearance fireplace manufacturer to ensure that DuraTech Chimney is an approved installation method.

DuraTech is a 1" wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas.

See all 14" DuraTech Chimney Pipe.

Additional Information:

With a Thermal Tech blanket insulation encased between duel walls, DuraTech offers superior safety and performance. It keeps the outer wall cool while ensuring high flue gas temperatures for optimum draft performance. The inner wall is 25% thicker than competitive chimneys, for an extra margin of safety. DuraTech chimney is tested and listed for continuous operation at 1000° F flue gas temperatures, one hour at 1400° F and ten minutes at 1700° F, in accordance with the UL 103 test standard.

  Installation Instructions

  Installation Instructions

WARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
Specifications:

• Diameter: 14"
• Construction Material: Galvalume Steel
• Clearance: 2" clearance to combustibles
• Listings: c-UL-us Listed to UL 103 and ULC S604 (MH7399)

The DuraTech Anchor Plate is used to attach DuraTech Chimney to zero-clearance or masonry fireplaces. Check with the zero-clearance fireplace manufacturer to ensure that DuraTech Chimney is an approved installation method. DuraTech is a 1" wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. See all 14" DuraTech...

  Manufacturer's Limited Lifetime Warranty