12'' DuraTech Flat Roof Flashing - 12DT-FF
DuraTechRoof Flashing is used to weather proof the penetration of chimney pip through the roof. A storm collar is required (not included). Select the proper roof flashing based on the pitch of the roof. For example, a 6/12 pitch has a vertical rise of 6" over a horizontal distance of 12".
DuraTech is a 1" wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas.
See all 12"DuraTech Chimney Pipe.
Additional Information:
With a Thermal Tech blanket insulation encased between duel walls, DuraTech offers superior safety and performance. It keeps the outer wall cool while ensuring high flue gas temperatures for optimum draft performance. The inner wall is 25% thicker than competitive chimneys, for an extra margin of safety. DuraTech chimney is tested and listed for continuous operation at 1000° F flue gas temperatures, one hour at 1400° F and ten minutes at 1700° F, in accordance with the UL 103 test standard.
WARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
Specifications:
- Diameter: 12"
- Construction Material: Galvalume Steel
- Clearance: 2" clearance to combustibles
- Listings: c-UL-us Listed to UL 103 and ULC S604 (MH7399)
- Clearance:
- Non-Clearance
- Country Of Origin:
- United States
- Pipe Piece:
- Flashing
- Type:
- Class A Pipe
- Diameter:
- 12 Inch
- Product Type:
- Chimney Pipe
- HR-mail-only:
- true
- __badge:
- Free Shipping
- _showBulkPricing:
- is-open
- _Base Price:
- 250.99