10" DuraTech Tee Bracket - 10DT-TSB

The Adjustable Tee Support Bracket is used as a wall support for a chimney system. The adjustable base provides 2" to 6" clearance to the wall. This bracket can be installed above or below the Tee and will support 30' of DuraTech Chimney. Please Note If installed below the Tee, a short section of pipe is required.

DuraTech is a 1" wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas.

See all 10" DuraTech Chimney Pipe.

Additional Information:

With a Thermal Tech blanket insulation encased between duel walls, DuraTech offers superior safety and performance. It keeps the outer wall cool while ensuring high flue gas temperatures for optimum draft performance. The inner wall is 25% thicker than competitive chimneys, for an extra margin of safety. DuraTech chimney is tested and listed for continuous operation at 1000° F flue gas temperatures, one hour at 1400° F and ten minutes at 1700° F, in accordance with the UL 103 test standard.

  Installation Instructions

  Installation Instructions

WARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
Specifications:

• Diameter: 10"
• Construction Material: Galvalume Steel
• Clearance: 2" - 6" clearance to wall
• Listings: c-UL-us Listed to UL 103 and ULC S604 (MH7399)

The Adjustable Tee Support Bracket is used as a wall support for a chimney system. The adjustable base provides 2" to 6" clearance to the wall. This bracket can be installed above or below the Tee and will support 30' of DuraTech Chimney. Please Note If installed below the Tee, a short section of pipe is required. DuraTech is a 1" wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers,...

  Manufacturer's Limited Lifetime Warranty